Platinum Plate/Platinum mesh Electrode

1. Electrodes are suitable for various electrochemical workstations, voltage stabilizing power supplies, potentiostats, etc. Suggest using current range < 1A.

2. Platinum Plate/platinum mesh electrodes are made of high-purity platinum, so they are relatively soft. Please do not bend the connection area between the platinum Plate/platinum mesh and the electrode rod to avoid the breakage,

3. If the platinum plate/platinum mesh is contaminated during use, please soak it in the corresponding solvent. When soaking, please hang the electrode in solvent, do not place directly at the bottom of the container. Additionally, if you need to use sandpaper to polish the platinum plate, please operate with caution as this may damage the Pt electrode. Do not use sandpaper to polish the platinum mesh.

4. The platinum plate/platinum mesh electrode of the PTFE jacket is used in a normal temperature and pressure environment. Please do not use it for a long time when temperature is above 40 ℃.

5. The platinum electrode of the glass jacket is used in a normal pressure environment, and it is recommended not to operate in environments below 0 ℃ and above 80 ℃

Long term use.

6. The platinum electrode of the glass jacket, as the glass is fragile, please carefully check for any damage when receiving the electrode.

Please contact us within 24 hours If there is any damage when you receiving the product.